No More Gaps Timber Floor Walnut 380g Selleys — Hillcock Industrial Skip to content
No More Gaps Timber Floor Walnut 380g

No More Gaps Timber Floor Walnut 380g

by Selleys
SKU I-151461
MFR 101908

Create an account today to get access to pricing and availability.

Availability:
Out of stock

No More Gaps Timber Floors is specially designed for filling and sealing gaps around and between tongue and groove timber flooring and also between other timber panels and fitting where extra flex is required.

It is formulated to provide superior, long lasting resistance to the movement of hardwood timber floorboards and other timber panels and fittings, created by temperature and humidity changes. It is available in a range of timber colours to match a wide range of timber types.

Key Features
  • Best for hardwood timber floors, and around & between all types of timber panels and fittings
  • Superior flexibility and stretch capability to cope with movement
  • Truly sandable to give a smooth clean finish.
  • Can be stained, varnished or painted
  • Contains real wood fibre allowing the filler to receive stains better than standard gap fillers
  • Filler provides an airtight seal, keeping out draughts, dust and pests.
  • Easy water clean up
Where can this product be used?
  • For filling and sealing gaps around and between tongue and groove timber floors.
  • Around and between all types of timber panels and fittings eg. Bedroom and kitchen fittings, benchtops, skirting boards and architraves.
What materials is this product suitable for?
  • Timber floors
  • Timber match:
  • Jarrah - Jarrah, River Red Gum, Karri
  • Hardwood - Black Butt, Spotted Gum, Brush Box , Tasmanian Oak, Cypress, Beech
  • Walnut - Ironbark, Teak, Dark stained timbers and engineered floors
  • Baltic - Pine, Myrtle, Alpine Ash
How to Use
  • Surface to be filled must be clean, dry and free from dust.
  • Cut seal and nozzle to suit width of gap. Fit to cartridge. Insert into caulking gun such as Selleys Light Speed Caulking gun.
  • Apply with caulking gun, forcing product into the gap.
  • Press in and smooth off with a spatula. Take care not to drag out applied filler from the gap. Use spatula to scrape off as much residue as possible from the timber surface, to minimise sanding necessary.
  • Clean up with a damp cloth immediately.
  • Allow to dry for at least 24 hours before sanding off any residue from timber surface. Allow longer time in colder weather or if residue left on timber is excessive.
  • Stain and varnish/paint as desired. Ensure stain/varnish is not allowed to pool in the joint lightly wipe off while wet if necessary.

    • Limitations:

    • Not for exterior use.
    • Not for gaps greater than 3mm wide in trafficable joints.

    WARNING: Wear a P1 dust mask when sanding

    Handy tips
    • Ensure sufficient product is applied into gap, if filling tongue and groove overlaps
    • Coverage: 18 m / 3mm bead
    • Re-apply filler if timber movement is excessive and movement capability is exceeded, or if a flush fill is desired.

    WARNING: Wear a P1 dust mask when sanding

    Clean Up
    • Uncured product may be removed with water.
    • Cured product can be removed by sanding and scraping.