Wet Area White 300g Selleys — Hillcock Industrial Skip to content
Wet Area White 300g

Wet Area White 300g

by Selleys
SKU I-151366
MFR 102688

Create an account today to get access to pricing and availability.

Availability:
Out of stock

Selleys Wet Area Silicone Sealant gives you a superior waterproof and mould resistant seal that will not shrink, crack or peel away. This mould resistant formulation is ideal for use in bathrooms, kitchens and laundries.


For more information and tips on the Wet Area range, click here.

Key Features
  • 100% silicone sealant
  • 25 year guarantee* against cracking or peeling away.
  • Waterproof seal - Superior adhesion and resistance to lifting provides a long lasting, flexible seal
  • Mould resistant - helps prevent growth of unsightly black mould and fungus.
  • Available in a range of colours to suit most wet areas.
  • Non corrosive neutral cure formula.
Where can this product be used?
  • Showers screens
  • Baths
  • Spas
  • Sinks
  • Plumbing Fixtures
What materials is this product suitable for?
  • Ceramic, glazed and porcelain fixtures
  • Metal, copper and brass fittings
  • Plastic laminates
  • Rubber
  • Glass
  • Stainless steel
  • Concrete and grouts
  • Many plastics including polystyrene
How to Use

Use in a well ventilated area. Avoid contact with skin and eyes.

  • Clean surface with mineral turpentine and dry.
  • Cut cartridge, fit and cut nozzle at 45 angle and fit into a caulking gun.
  • Apply with steady pressure, ensuring sealant is pushed into joint.
  • Tool with a spatula dipped in detergent water within 5-10 mins of application.
  • Clean up with mineral turpentine before product skins.
  • Sealant will cure in 72hrs.

    • Limitations:

    • Not paintable. Complete painting 7 days prior to applying sealant.
    • Not suitable for building materials that bleed oils or solvents, such as impregnated wood.
    • Not for use on polyethylene, polypropylene or Teflon. Pre-test plastics before use.
    • Not suitable for aquariums.
    • Not suitable for food or drinking water contact.
    • Not suitable for permanent water immersion.
    Handy tips
    • For neater joints, mask sides before applying sealant and remove tape before sealant skins.
    • When first applying product, extrude a small amount onto a piece of scrap material to ensure a smooth continuous flow of silicone sealant.
    • Work in sections that can be completed before sealant skins.
    • Tooling off and tape removal must be completed before skinning occurs or a rough surface, may result so working in sections allows for a better finish.
    *Warranty Information

    Refer to product label for full conditions. This guarantee does not limit and may not necessarily exceed your rights under the Competition and Consumer Act 2010.

    Clean Up
    • Uncured product may be removed with mineral turps.
    • Cured product can be removed with Selleys Silicone Remover or by
      cutting and scraping.